Chris Duke shows you how to upgrade the stock speakers on a Ford F-150, replacing them with speakers, amps and a subwoofer from Alpine Electronics, a subwoofer enclosure from SuperCrewSound, and a deep cycle battery from OPTIMA.
85 Comments
Leave Your Reply
You must be logged in to post a comment.
You always run the possibility of heat traveling to the cone and melting glue or damaging the coil. I never solder to speakers. And if you end up with a cold solder joint, vibration will work it loose and it will sound like a short when you hit bumps.
Running Windows XP on a Macbook Pro. I like it. Glad I’m not the only one.
are these older re-uploads?
These must be re-uplodes, the camera is hand controlled and theres no sponcering that takes up half the video. Plus hes running windows xp, kinda a give away.
Where is all your videos ?
yup, look like it, and theres only like 22 vids total, when im sure they’ve done waay more, just cant find them.
lost somehow
are these older re-uploads?
These must be re-uplodes, the camera is hand controlled and theres no sponcering that takes up half the video. Plus hes running windows xp, kinda a give away.
yup, look like it, and theres only like 22 vids total, when im sure they’ve done waay more, just cant find them.
lost somehow
NOTE: All our previous videos were accidentally deleted, so we had to re-upload them all. Sorry for the inconvenience. We hope you continue to subscribe, LIKE and Favorite our videos! Visit our website (motorz.tv) for more!
Man, that system hits hard even through the camera microphone. I can only imagine what it sounds like in person. I got an 1140 watt system in my stang with 2 tens and 6 amps in the trunk (mach 1000) but, I haven’t been 19 4 a long time now so, the volume never goes past half way these days & the mach button doesn’t get pressed. LOL getting old sucks
Man, that system hits hard even through the camera microphone. I can only imagine what it sounds like in person. I got an 1140 watt system in my stang with 2 tens and 6 amps in the trunk (mach 1000) but, I haven’t been 19 4 a long time now so, the volume never goes past half way these days & the mach button doesn’t get pressed. LOL getting old sucks
How much was this setup + the head unit? Thz
How much was this setup + the head unit? Thz
This man makes some of the best instructional videos ever. But on this and the ford mustang Gt audio upgrade he doesn’t show how wire the crossovers, amps,. How to wire the dual amps to the head unit. wire the speakers and sub to the amps. Thats the most difficult part of puting a audio system in a car!
This man makes some of the best instructional videos ever. But on this and the ford mustang Gt audio upgrade he doesn’t show how wire the crossovers, amps,. How to wire the dual amps to the head unit. wire the speakers and sub to the amps. Thats the most difficult part of puting a audio system in a car!
Why didn’t you run 1 0 gauge to a distribution block in the back and wouldn’t stacking them make them heat up faster??
Why didn’t you run 1 0 gauge to a distribution block in the back and wouldn’t stacking them make them heat up faster??
Should have went 2 type R 12s like i did in my 05 SuperCrew, Supercrewsound said they couldn’t make me a box to fit these subs under the seat. Ha
20 bucks for some shitty molded plastic? wow
How do you wire tweeters
imagine you buy a brand new truck that cots you tons of money only to take it to some guy so he can cut you doors with dremel tool and put holes on your floors.
I have the same head unit in my 2004 pathfinder and it won’t play videos… Called crutchfield and they weren’t much help because I didn’t buy it from them!
Small crossovers my ass lol those r bigger than the speakers smh
Straight forward, lol.
how much for this system?
great job!
is there a dash a dash that will fit the alpine 9 inch in a same truck
Hey! Thank for sharing this upgrade ideas and kits to use. It helps me a lot and this is what I looking for. Keep it up. Cheers!
same process for a 2014 f150? did this have a factory amp in it?
Did you have to disconnect the anc? Im getting feedback from the audio system (mics). Stock hd to the AC LCQ1 and then to the amp and speakers. It’s feedback. Any idea how to stop this in a 2015 f150?
Yea – that’s understood and very basic. I’m addressing feedback over the mic. Ie..9th gen Honda same issue, but you can go into the diag menu shut it off or unplug the module. I’m NOT new to Installs; I have 19 years experience but ive mostly worked on rides that don’t have this issue. Does anyone know about the ANC/MIC Interference on the 2012-2015 f150 and how to disable the mics?
You had 2 sets of component systems but didn’t install any tweeters in the back doors, why?