Season 1: Episode 5
Ford F-150 Vehicle Graphics Installation
Aired: June 27, 2008
Posted in: All Episodes, Appearance, Season 1
Chris Duke from Motorz TV shows you how vinyl vehicle graphics are made, and the tips and tricks to making sure the installation of your decal graphics kit goes smoothly.
Facebook comments:
Disclaimer
THE INFORMATION PROVIDED IN THESE PROGRAMS AND WEBSITE ARE FOR GENERAL INFORMATION ONLY AND ARE NOT DIRECTED TO ANY PARTICULAR INDIVIDUAL OR FOR ANY PARTICULAR MAKE OR MODEL OF VEHICLE. MODIFYING YOUR VEHICLE CAN BE DANGEROUS. APPROPRIATE SAFETY EQUIPMENT AND PROCEDURES SHOULD BE USED. USE CAUTION WHEN OPERATING A MODIFIED VEHICLE AND REMEMBER YOU DO SO AT YOUR OWN RISK. THE PROGRAMS, DEMONSTRATIONS AND/OR PROCEDURES MAY NOT PROVIDE ALL NECESSARY OR RELEVANT INFORMATION. APPLICABLE LOCAL, STATE AND FEDERAL LAWS SHOULD BE CHECKED BEFORE ANY PROJECT IS COMMENCED. ADDITIONALLY, BEFORE COMMENCING YOUR PROJECT, YOU SHOULD CHECK A VEHICLE'S OWNER'S MANUAL, SHOP MANUAL, WARRANTY BOOKLET AND/OR WITH A MANUFACTURER'S REPRESENTATIVE FOR ADDITIONAL INFORMATION AND TO UNDERSTAND WHAT EFFECT, IF ANY, A MODIFICATION WILL HAVE ON THE SAFETY FEATURES OR THE MANUFACTURER'S WARRANTY COVERAGE OF YOUR VEHICLE. PLEASE GET PROFESSIONAL ASSISTANCE IF YOU'RE NOT SURE, AND, IF PROVIDED, ALWAYS REVIEW THE INSTALLATION INSTRUCTIONS OF ANY AFTERMARKET PRODUCT. DUKE NETWORKS, LLC MAKES NO WARRANTIES EXPRESSED OR IMPLIED AS TO THE COMPLETENESS, ACCURACY, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF ANY OF THE DEMONSTRATIONS, PROCEDURES, AND/OR PROGRAMS NOR DOES IT GUARANTEE THAT THE PROGRAMS WILL BE ERROR-FREE OR CONTINUOUSLY AVAILABLE. YOUR USE OF THIS WEBSITE AND THE PROGRAMS CONTAINED THEREIN ARE AT YOUR SOLE RISK.Sponsors
Cool Links
Latest News
As Seen On Motorz TV
Hedman Hedders, pioneered the use of ceramic-metallic coatings, back in the early 80's. Previously used exclusively in the aerospace industry, Hedman Hedders recognized it's potential for improving both the lifespan, and functionality of exhaust headers. All Hedman street Hedders are MADE IN THE USA, and are backed by a lifetime warranty against manufacturing defects! The HTC coating is covered for a full 5 years.See Your Product on Motorz!
Subscribe on YouTube
Latest Photos
Motorz Apps
"Great Show! I always enjoy watching these shows, even though I know most of this stuff. This is a DIY SHOW! Keep them coming!"
- Daniel S. (Henderson, NV)
April 10th, 2009 at 7:05 am
great instructional show – thanks!
April 10th, 2009 at 10:05 am
great instructional show – thanks!
June 4th, 2009 at 11:55 pm
Where do you get those knifes talk about around 3:30? Friend of mine got a vinylshop and never saw one of those.. Please respond!
June 4th, 2009 at 11:55 pm
Where do you get those knifes talk about around 3:30? Friend of mine got a vinylshop and never saw one of those.. Please respond!
June 5th, 2009 at 2:55 am
Where do you get those knifes talk about around 3:30?Friend of mine got a vinylshop and never saw one of those..Please respond!
June 5th, 2009 at 2:55 am
Where do you get those knifes talk about around 3:30?Friend of mine got a vinylshop and never saw one of those..Please respond!
June 5th, 2009 at 12:36 pm
It’s a product Scotch called “3M Scotch Paper Cutter” and it’s typically sold for the purpose of cutting gift wrap, but it works great in a vinyl shop. CostCo frequently sells them in a pack where you can get several on the cheap.
June 5th, 2009 at 3:36 pm
It’s a product Scotch called “3M Scotch Paper Cutter” and it’s typically sold for the purpose of cutting gift wrap, but it works great in a vinyl shop. CostCo frequently sells them in a pack where you can get several on the cheap.
February 16th, 2010 at 4:08 pm
i do this is my graphics class…very easy once you get a hang of it
February 16th, 2010 at 4:08 pm
i do this is my graphics class…very easy once you get a hang of it
February 16th, 2010 at 7:08 pm
i do this is my graphics class…very easy once you get a hang of it
October 3rd, 2011 at 2:26 pm
What ‘plotter’ are you using and what software
October 3rd, 2011 at 2:26 pm
What ‘plotter’ are you using and what software
October 3rd, 2011 at 2:28 pm
@MattGibbons1998 That was a Bobcat using LXi Apprentice, however we now have a Graphtech CE5000 and use Mac Adobe Illustrator for output.
October 3rd, 2011 at 2:28 pm
That was a Bobcat using LXi Apprentice, however we now have a Graphtech CE5000 and use Mac Adobe Illustrator for output.
October 3rd, 2011 at 5:26 pm
What ‘plotter’ are you using and what software
October 3rd, 2011 at 5:28 pm
That was a Bobcat using LXi Apprentice, however we now have a Graphtech CE5000 and use Mac Adobe Illustrator for output.